[cisco-voip] Intercom in Callmanager

[Ortiz, Carlos]

I think I have tried this and you can't have a shared line that
autoanswers.  Let me know if you find out differently.  I think that's
why most of the 3rd party solutions use multicast for paging.
 
Carlos

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Schuett, Court
(MBNAP it)
Sent: Friday, October 28, 2005 12:33 PM
To: 'Burton, Jason'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Intercom in Callmanager


That should work pretty well.  I can't imagine there would be any
problems with number of users.  To be honest, I've only done it with
single lines, but I don't think there would be a problem with multiple
lines.  I guess it depends on how many you're thinking about putting it
on ;)
 
 
Court Schuett
Network Systems Engineer
Millward Brown
Naperville, IL
 
630-955-8983
court.schuett at us.millwardbrown.com
 

________________________________

From: Burton, Jason [mailto:Jason.Burton at CoreBTS.com] 
Sent: Friday, October 28, 2005 10:37 AM
To: Schuett, Court (MBNAP it)
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Intercom in Callmanager



Basically all I'm looking for is a way for the receptionist to be able
to page a department when she gets a call at the main number.  They want
to be able to tell the group they have a call parked extension ..... 

 

So I guess I was thinking about doing what you suggested, with putting
the PLAR on the receptionist phone to call the 'shared group' autoanswer
line. 

 

Do you run into any problems once you cross a certain threshold of
users?  

 

________________________________

From: Schuett, Court (MBNAP it)
[mailto:Court.Schuett at us.millwardbrown.com] 
Sent: Friday, October 28, 2005 10:06 AM
To: Burton, Jason; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Intercom in Callmanager

 

What kind of intercom are you looking for?  I've set up second lines on
a phone that are set to auto-answer that can then be used as a
pseudo-intercom.  Or you can set up special partitions with only
specific lines in it.  We've also set up loud speakers in a warehouse
attached to an ATA for paging.  Depends on what you're looking for in an
intercom though.  

 

Court Schuett

Network Systems Engineer

Millward Brown

Naperville, IL

 

630-955-8983

court.schuett at us.millwardbrown.com

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Burton, Jason
Sent: Friday, October 28, 2005 9:45 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Intercom in Callmanager

I know there are third party products that can do an intercom.  Is there
any 'poor mans' version of this that any of you have tried.  I was
thinking about taking a PLAR shared line appearance approach, anyone
tried it?  Suggestions?

 

This is for a Callmanager 3.3 install

 

Thanks again!

 

 



==================================================== 
This email is confidential and intended solely for the use of the 
individual or organization to whom it is addressed. Any opinions or 
advice presented are solely those of the author and do not necessarily 
represent those of the Millward Brown Group of Companies.  If you are 
not the intended recipient of this email, you should not copy, modify, 
distribute or take any action in reliance on it. If you have received 
this email in error please notify the&nb! sp;sender and delete this
email 
from your system. Although this email has been checked for viruses 
 and other defects, no responsibility can be accepted for any loss or 
damage arising from its receipt or use. 
==================================================== 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051028/cef2cad3/attachment-0001.html