[cisco-voip] Problems with 2811 as H.323-Gateway, CCM 4.1
Hans-Peter Walter
Hans-Peter.Walter at tds.de
Fri Sep 9 13:44:59 EDT 2005
Hello,
I try to configure a Cisco 2811 with VIC2-2BRI-NT/TE and a PVDM2-16 to act
as gateway between our CCM and our PBX.
We had a test-equipment in July 2000 for 6 months with 2600 and a CCM
3.00, and it worked with the following config (see below).
Now I tried to get the 2811 working with a new CCM 4.1, I know it is a
different config, but no success, and after hours and hours of
reading, I don't know any further... I think I read every single
CCO-Document ;-).
When I turn on a "debug isdn q931" I can see that an IP-Phone-Call
(8200-->1234) reaches the router,
but will not be forwarded to the PBX (Cause i = 0x85B2 - Requested
facility not subscribed).
When I call an IP-Phone (8200) from the PBX (1234), the call reaches the
router, but will not be forwarded
to the CCM (Cause i = 0x80A2 - No circuit/channel available). Debugs see
below.
We have a CCIE-Voice-Consultant here to help us next week, but I want to
get this work, that I can play around a little bit.
The rest works fine, CCM 4.1, 7912, 7940, 7960 with 7914, ATA with analog
phone, SRST-Fallback, Phone Services,
Global Directory and all the stuff, but this router.....
Sorry for the "newbie"-question, maybe you can help me or point me to a
newbie-discussion/forum.
Thanks in advance and have a nice weekend,
HP
============= Config from July 2000 ===================================
voice-port 1/0/0
input gain -6
cptone DE
!
voice-port 1/0/1
input gain -6
cptone DE
!
dial-peer voice 2 voip
destination-pattern .
codec g711alaw
no vad
session target ipv4:10.200.112.10
!
dial-peer voice 10 pots
destination-pattern .
direct-inward-dial
port 1/0/0
!
dial-peer voice 11 pots
destination-pattern .
direct-inward-dial
port 1/0/1
!
gateway
============= IP-Phone -8200 --> PBX-Phone -1234:
=============================
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Calling Party Number i = 0x0081, '8200'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '1234'
Plan:Unknown, Type:Unknown
Sep 9 17:16:55.964: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8 callref =
0x8D
Channel ID i = 0x89
Sep 9 17:16:56.016: ISDN BR0/0/0 Q931: RX <- DISCONNECT pd = 8 callref =
0x8D
Cause i = 0x85B2 - Requested facility not subscribed
=============PBX-Phone -1234 --> IP-Phone -8200
=============================
Sep 9 17:17:48.300: ISDN BR0/0/0 **ERROR**: host_information: Unexpected
INFO - call id 0x8010
Sep 9 17:17:48.340: ISDN BR0/0/1 Q931: RX <- SETUP pd = 8 callref = 0x2C
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Calling Party Number i = 0x0080, '1234'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '8200'
Plan:Unknown, Type:Unknown
Sep 9 17:17:48.360: ISDN BR0/0/1 Q931: TX -> CALL_PROC pd = 8 callref =
0xAC
Channel ID i = 0x8A
Sep 9 17:17:48.368: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1
is 0x0 0x0, Calling num 1234
Sep 9 17:17:48.368: ISDN BR0/0/0 **ERROR**: CC_CHAN_GetIdleChanbri: All
channels busy
Sep 9 17:17:48.392: ISDN BR0/0/1 Q931: TX -> DISCONNECT pd = 8 callref =
0xAC
Cause i = 0x80A2 - No circuit/channel available
============= Config 2811tdsvoip1 =======================================
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2811tdsvoip1
!
boot-start-marker
boot system flash c2800nm-ipvoicek9-mz.124-3.bin
boot-end-marker
!
logging buffered 10000 debugging
enable secret 5 $1$Yzkh$43RdMyrIkzoUSXl.EfzGN0
!
aaa new-model
!
!
aaa authentication login default group tacacs+ enable
aaa authentication enable default group tacacs+ enable
aaa accounting commands 15 default start-stop group tacacs+
!
aaa session-id common
!
resource policy
!
clock timezone MET 1
clock summer-time MESZ recurring last Sun Mar 2:00 last Sun Oct 3:00
network-clock-participate wic 0
network-clock-participate wic 1
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.200.0.1 10.200.0.9
ip dhcp ping packets 5
!
ip dhcp pool VOIP
network 10.200.0.0 255.255.252.0
dns-server XXX
domain-name tds.de
default-router 10.200.0.1
option 150 ip 10.200.210.180
!
!
no ip domain lookup
isdn switch-type basic-net3
!
voice-card 0
dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Management-Interface 2811tdsvoip1
ip address 10.128.16.14 255.255.255.255
!
interface FastEthernet0/0
description Test-VLAN YY
ip address 10.200.210.66 255.255.255.0
duplex full
speed 100
!
interface FastEthernet0/1
description VLAN XX - VoIP-Telefone
ip address 10.200.0.1 255.255.252.0
duplex full
speed 100
!
interface BRI0/0/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
!
interface BRI0/0/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
!
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.200.210.1
!
ip http server
no ip http secure-server
ip tacacs source-interface Loopback0
!
access-list 100 deny ip any host 10.200.210.180
access-list 100 permit ip any any
!
!
tacacs-server host XXX
tacacs-server host XXX
tacacs-server directed-request
tacacs-server key 7 XXX
!
control-plane
!
!
!
voice-port 0/0/0
!
voice-port 0/0/1
input gain -6
cptone DE
!
voice-port 0/1/0
!
voice-port 0/1/1
!
!
!
!
!
dial-peer voice 2 voip
description Weiterleitung von TK zu Callmanager
destination-pattern 8200
session target ipv4:10.200.210.180
codec g711ulaw
no vad
!
dial-peer voice 10 pots
destination-pattern .
direct-inward-dial
port 0/0/0
!
gateway
timer receive-rtp 1200
!
!
call-manager-fallback
max-conferences 8 gain -6
ip source-address 10.128.16.14 port 2000
max-ephones 42
max-dn 144
system message primary Server TDS NSU nicht erreichbar
system message secondary Backupmodus
time-zone 28
time-format 24
date-format dd-mm-yy
!
alias exec dhcp1 sh ip dhcp binding
alias exec dhcp2 sh ip dhcp pool
!
line con 0
line aux 0
line vty 0 4
exec-timeout 0 0
line vty 5 20
!
warm-reboot
scheduler allocate 20000 1000
ntp clock-period 17208792
ntp source Loopback0
ntp access-group peer 30
ntp server XX
ntp server XX
!
end
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050909/50efaf9b/attachment-0001.html
More information about the cisco-voip
mailing list