[cisco-voip] Meet Me conference not working

[Wes Sisk]

how are you joining the conference?
1st person: press meetme softkey and dial desired meetme number
2nd person: just dial the meetme number (do not press the softkey)

/Wes
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Andrew Riley
Sent: Monday, September 12, 2005 8:40 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Meet Me conference not working


Hi there



Am having problems with getting 'Meet Me' conference to work in both CCM
4.02 or 4.13



Meet Me numbers configured in the <None> partition and phones have <None>
CSS - Conference Bridge and phones are registered to the default device
pool. No MRG is configured, so I assume the Conference Bridge is available
too all. I am only using a software conference bridge. Also, all devices are
part of the same region and location (so should be no codec issues)



>From phone (a) I can join the 'meet me' conference, however dialling from
phone (b) I get fast busy. Looking through the traces the phone plays
(reorder tone)





Is there a service parameter to enable meet me or am I doing something
wrong.



Regards

Andrew
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050912/8998e058/attachment-0001.html