[cisco-voip] Re: cisco-voip (no subject)

[Justin Steinberg]

Thomas,

It sounds like you are running into a similiar issue that I
experienced a while back.  Are you running MGCP pstn gateways?  If so,
you probably are allowing REDIRECTING NUMBER IE DELIVERY inbound and
outbound on the gateway endpoint configuration page within ccmadmin.

Unless you are using a gateway for voicemail intergration, or you use
centralized voicemail, these settings should not be enabled.

Check and disable and try again.

Justin

> Message: 5
> Date: Fri, 23 Sep 2005 11:04:02 -0400
> From: "Thomas Theado" <TTheado at tla.com>
> Subject: [cisco-voip] (no subject)
> To: <cisco-voip at puck.nether.net>
> Message-ID: <43B78DBAD3366F48B96610E046148408A5700B at hqwexc.tla.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I am running call manager 4.1 and due to Hurricane RITA we are
> accomplishing some call coverage for a help desk.  When the new number
> is dialed directly everything works great.  If a user dials the old
> number (it has been forwarded to the new number) it goes directly to the
> autoattendant.
>
> Any ideas?
>
> Thanks,
>
> Tom