[cisco-voip] Fax Problem after Hardware upgrade

[Ahmad Cheikh Moussa]

Hi Simon,

cip at cips.nl wrote:
> Are you using a MGCP or H323 configuration?

I use H323 configuration. The fax comes over the PRI Interface and goes
to the fax server.

> Can you post the MGCP config please.
> Are the faxes coming in over the E1 or the BRI interfaces?
> Please run the command "show controller e1" and take a look if you have slip
> secs.
Yes, I have slip seconds. I try to fix this and make another
test.

Thanks,
  Ahmad



-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/