[cisco-voip] Faxing recommendations

[Klaus Darilion]

Hi Scott!

You could use the fax onramp/offramp application in your Cisco Box (if 
available) and receive/send the fax directly at the gateway. Incoming 
emails will be sent to the users via email. Outgoing fax are also 
possible sending the Fax with SMTP to the Gateway.

I've did this for incoming (onramp) faxes in this project:
http://www.enum.at/index.php?id=380

There would fine configuration files and a perl script to reformat the 
Emails sent by Cisco Boxes.

regards
klaus

Voll, Scott wrote:
> What would others suggest for Faxing?  Currently I have 2 PRI’s coming 
> in that support about ~500 users and ~12-15 Faxes.  I really don’t want 
> to buy POTS lines as that would be $400/ month added cost.  I currently 
> have Xerox Fax/printers/scanners (set to 14.4k faxing).  All are 
> currently connected to ATA186s  but yesterday it sounds like that 
> started having issues again.  What have people had good success with? 
> 
>  
> 
> THX
> 
>  
> 
> Scott
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip