[cisco-voip] VM for same DN different partitions

[Wes Sisk]

you have 2 options AFAIK:

1. use different actual numbers but use the line text label to make the 2nd
line appear as the same number to the user.

2. use multitenant MWI - Configure line2 as a differnet number in your
voicemail system.  Enable Multitenant MWI on callmanager and put a
translation pattern in the CSS of MWI on/off to transform the dummy number
back to the real number and use the CSS of the translation pattern to limit
the partitions to only include the partition of line2.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Ortiz, Carlos
Sent: Friday, September 30, 2005 8:04 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VM for same DN different partitions


I was wondering if anyone has found a way to give Unity VM to the same DN in
different partitions.  I was once told by TAC that the way to do this was by
using different Voice Mail Profiles.  I remember trying to do this, but did
not get it to work.  Has anyone gotten this to work or figured another way
to accomplish this?



Thanks



Carlos


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050930/d9244625/attachment-0001.html