[cisco-voip] Modifying remote router t1 timeslots

[TechGuy]

This may be slightly off topic, but I have to modify two remote routers t1
timeslots since I am upgrading them from 512k to full T1.
 Simple one line change:
 service-module t1 timeslots 1-8
 changes to:
 service-module t1 timeslots 1-24
 Nervous that if I change running-config remotely, circuit will go down and
I will unable to save config after making the change and unable to access
it. Then it will have to be rebooted and be back to the 1-8 tmeslots.
 I could do the whole reload command but in the end I still may be stuck
with the 1-8 timeslots.
 It's been a while but I think I could do something with the startup config
instead of the running config, edit the startup maybe and then just reload
the router with the change?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050930/e67a7187/attachment.html