[cisco-voip] PRI Usage reporting ?

[Wes Sisk]

for now have to use ART/CAR reports or poll the gateway via SNMP. in the
future you will be able to use the new perfmon counter introduced by
CSCsa67949

in currently reelased CM's the only approximate you can get is monitor total
number of active calls on the MGCP gateway to see if both are full.  The
above DDTS addresses the next level of granularity  where the 2 trunks on
the gateway have different use.

/Wes
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of TechGuy
Sent: Friday, September 30, 2005 9:26 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] PRI Usage reporting ?


We have our two PRI's coming into a 3662, this is our gateway router for
CallManager, we utilize MGCP by the way.  One PRI is local calls one is long
distance.

Is there an easy way to report on utilization of the PRI's?  Just need to
see that we are not ever maxing the thing out. I know I can get telco to do
this for me, but its just not very convenient and timely.  If I can run
something local and find that there are times when its maxed out then I
would probably get telco to run something so I can see just how much busys
and stuff are going on.

Any ideas or thoughts?