[cisco-voip] How to move idle phones from publisher to subscriber?
Voigt Thomas
Thomas.Voigt at netkom.de
Thu Apr 6 08:29:35 EDT 2006
Kevin Thorngren wrote:
> The phones will register to their secondary server when they lose
contact with their primary server. Idle phones will immediately (this
can vary depending on how they lose connectivity) failover. Phones
> that are on active calls will failover once the call is completed.
The active callers will see a message like CM features down. They won't
be able to perform transfers, conferences, etc until they hang
> up and the phone fails over to the secondary CCM.
Hi Kevin!
Many thanks for your answer!
It gave me some "enlightment" =;-)
My intension was a "soft" switchover to the subscriber _without_ losing
any features (voice recording etc.) the
customers are using. So i thought it should be possible first to switch
over the idle phones (no one uses them
at this time) and then wait for the other phones going idle and
switchover them then.
But as you stated, the active calls are not dropped. This could be
enough at minimum.
--
Kind regards
Thomas Voigt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060406/d80fcefe/attachment.html
More information about the cisco-voip
mailing list