[cisco-voip] Fw: Need Advice on CCM and Unity Upgrade steps:

Erick Bergquist erickbe at yahoo.com
Fri Apr 7 08:05:51 EDT 2006


Also, don't do the Unity TSP update until after you have 4.1(1) installed, 4.1(1) install comes with TSP 8.0(2) so  if you upgrade TSP beforehand it's going to be replaced. 

I would also take a BARS backup of your current CCM setup before starting, and place it somewhere safe just in case. 

For unity, use DiRT and use the messages option to backup peoples VM also. The size of the backup will depend on the size of peoples mailboxes.

You do have the Unity upgrade kit since you're going from 3.x to 4.0?

----- Original Message ----
From: Justin Steinberg <jsteinberg at gmail.com>
To: ciscozest <ciscozest at gmail.com>
Cc: cisco-voip at puck.nether.net
Sent: Thursday, April 6, 2006 11:14:28 PM
Subject: Re: [cisco-voip] Fw: Need Advice on CCM and Unity Upgrade steps:

I think you have the right idea here.  I'd recommend running this
through in a lab first, or pulling a hard disk from your publisher
before starting.

You will also want to install the latest CallManager service release
for 4.1(3), which I believe is CCM 4.1(3)sr3a.

Also, Unity TSP 8.0(1) is buggy.  You will want to upgrade to a newer
TSP such as Unity 8.1(2) - which is compatible with CCM4.1(3).

Justin




On 4/7/06, ciscozest <ciscozest at gmail.com> wrote:
>
> Hi,
>
> Please correct me if I am still wrong. thanks
> CallManager upgrade steps:
> Uninstall existing BARS software
> upgrade to version 3.3(5).
> upgrade OS to 2000.4.2 with latest sr
> upgrade to version 4.1(3)
> Install with BARS 4.0(9)
> backup CCM 4.1(3) config to remote drive
> restore BARS to new CM 4.1(3) on the new hardware
> All our unity servers are Voice messaging only.
> Unity Upgrade Path:
>
> upgrade Unity TSP to version 8.0(1) which is compatible with CCM 4.1(3) -
> new H/W servers and then test
> upgrade unity to version 4.0(4)
> upgrade to unity version 4.1(1)
> Install Dirt and back up to remote drive
> restore unity to the new H/W server running Unity 4.1(1).
> How to ensure that all phone setting and content of vm will be retained
> after the upgrade? Any idea? Thank you
>
> ----- Original Message -----
> From: "Ryan Ratliff" <rratliff at cisco.com>
> To: "Robin H" <ciscozest at gmail.com>
> Cc: <cisco-voip at puck.nether.net>
> Sent: Saturday, April 01, 2006 12:06 AM
> Subject: Re: [cisco-voip] Need Advice on CCM and Unity Upgrade steps:
>
>
> Where is the step where you upgrade from 3.3(5) to 4.1(3)?  Remember
> you can't take a backup at 3.3(5) and restore it on to 4.1(3).
>
> -Ryan
>
> On Mar 31, 2006, at 8:45 AM, Robin H wrote:
>
> I have following servers:
> CallManager version 3.1(4)b with BARS 3.5(53)
> Unity 3.1(4)
>
> Need to upgrade to CM 4.1(3) and Unity 4.1(1) using New Hardware.
> Current user data on both CCM and Unity must be retained.
>
> CallManager upgrade steps:
> 1. upgrade to version 3.3(5).
> 2. Uninstall existing BARS software
> 3. Install with BARS 4.0(9)
> 4. backup CCM config to remote drive using BARS 4.0(9)
> 5. install BARS 4.0(9) on CM version 4.1(3)sr3
> 6. restore BARS to new CM 4.1(3) on the new hardware
>
> Unity upgrade steps: ???
>
> Can anyone advice me the correct migration steps for CCM and Unity?
>   Thanks







More information about the cisco-voip mailing list