[cisco-voip] speed dials and ext.mobility

[Bell, Joe]

You need to build in the speed dial on the em device profile as if it
were a completely separate phone.  That goes for anything you would ever
subscribe a phone too as well.  So if the question was to the speed
dials follow the em profile that are currently programmed on the phone
that the em user logs into, the answer would be no.  Check out the top
right of the device profile and you'll see speed dial listed there.
They need to be entered separately.

 

Joe Bell  (Not Spam-Joe either)

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, April 12, 2006 10:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] speed dials and ext.mobility

 

can anyone tell me if when you use extension mobility, your speed dials
follow?

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Sanity First : Number of days with fewer than
50 messages in my inbox at the end of the day:   buffer overrun



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060412/5b0c4f0f/attachment-0001.html