[cisco-voip] Cisco H.323 GW redundancy

[Kevin Thorngren]

You can use the dial-peer preference command to use the second T1 if  
the call fails going to the first.  This link, while not describing  
PRIs, does describe this:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/ 
123cgcr/vvfax_c/int_c/dpeer_c/dp_confg.htm#wp1068229

Kevin
On Apr 12, 2006, at 9:53 AM, <bababooey at cox.net> wrote:

> I currently have a T1 to the PBX using a Cisco IOS H323 GW on a 3725  
> series router.  My question is if I add an additional T1 to the same  
> PBX, can I set it up as a failover T1 or does the GW use channels from  
> both T1?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>