[cisco-voip] CME and doorbells??

[Andrius Kislas]

We have installed this one:
http://www.rocom-gmbh.de/englisch/produkt/tuerstation/a_b/doortelloe.htm

I had a problem with disconnect on FXS. Modifications on voice port had
to be done:

voice-port 2/0
 no supervisory disconnect lcfo
 disconnect-ack
 timeouts call-disconnect 0
 timeouts wait-release 20
 timeouts power-denial 1200

Call from and to CallManager are configured with dial-peers and router
patterns.

Andrius


Wydra, Jason wrote:
> Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
> port on a 2811 with CME? They want it so that if someone rings the
> doorbell it will ring all of the phone and they will have two way
> conversations with the person outside.
> 
>  
> 
> Thanks,
> 
>  
> 
> **Jason Wydra**
> 
>  
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip