[cisco-voip] VG224 and Faxing

[Mike Mike]

Carlos,

Check out this link:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_example09186a008020160d.shtml


I recently troubleshot a similar issue and the fix was to disable fax relay.

Hope this helps!

On 4/14/06, Ortiz, Carlos <CORTIZ at broward.org> wrote:
>
>  I have users complaining about intermittent fax issues with an MGCP based
> VG224 (working sometimes, sometimes not).  The setup is as follows:
>
>
>
> PSTN->3745VGW->VG224->Fax Machines
>
>
>
> I took the default config pushed down by Call Manger which doesn't
> configure much: (All ports and dial peers look like this)
>
>
>
> voice-port 2/0
>
>
>
> dial-peer voice 99920 pots
>
>  application mgcpapp
>
>  port 2/0
>
>
>
> Is there anything else I need to add to allow faxing to work more
> reliably?  There seems to be some type of negotiation failure as you hear
> the incoming beep sometimes, but no connection is made.
>
>
>
> Carlos
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060414/2262d005/attachment.html