[cisco-voip] VG224 and Faxing

[Ortiz, Carlos]

Since both my PRI gateway and VG224 are MGCP based I am going to follow
the instructions for MGCP.  Did you disable fax relay on your VG248 and
on your voice gateway as well?

 

________________________________

From: Mike Mike [mailto:voipermike at gmail.com] 
Sent: Friday, April 14, 2006 12:26 PM
To: Ortiz, Carlos
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG224 and Faxing

 

Carlos,

Check out this link:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configur
ation_example09186a008020160d.shtml 


I recently troubleshot a similar issue and the fix was to disable fax
relay.

Hope this helps!

On 4/14/06, Ortiz, Carlos < CORTIZ at broward.org
<mailto:CORTIZ at broward.org> > wrote:

I have users complaining about intermittent fax issues with an MGCP
based VG224 (working sometimes, sometimes not).  The setup is as
follows:

 

PSTN->3745VGW->VG224->Fax Machines

 

I took the default config pushed down by Call Manger which doesn't
configure much: (All ports and dial peers look like this)

 

voice-port 2/0

 

dial-peer voice 99920 pots

 application mgcpapp

 port 2/0

 

Is there anything else I need to add to allow faxing to work more
reliably?  There seems to be some type of negotiation failure as you
hear the incoming beep sometimes, but no connection is made.

 

Carlos


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060414/0f4a171f/attachment.html