[cisco-voip] MWI and Multi -Tenanting

[Darren Smith]

Hi,

Has anybody succesfully implemented MWI with multi tenanting on CCM 4.1.3 and Unity 4.0.5??

We have multiple customers on our callmanager and unity platform, some of these are smaller business, ad each of these has their own Partitions, and each of these partitions use the same DN range (eg 200x).

Other customers are in a generic partition, and their DN is their full DDI number.

We have set the MWI numbers (Full 10 digit numbers), but cannot get MWI to work.
The option for multi tenanting is set to turue within Callmanager Messaging Interfaces services, but I'm sure I need some transaltion patterns set, but can't work out what to do.

Thanks in advance

Regards 

Darren Smith 
Chief Operations Officer 
Silver Communities 

P 1300786755 
D 0756575299 
M 0405 847791 
E darren at silvercommunities.com.au 


 
 







DISCLAIMER: This email, together with any attachments, is intended for the named recipient(s) only; and may contain privileged and confidential information. If received in error, you are asked to inform the sender as quickly as possible and delete this email and any copies of this from your computer system network.
If not an intended recipient of this email, you must not copy, distribute or take any action(s) that relies on it; any form of disclosure, modification, distribution and /or publication of this email is also prohibited.
Unless stated otherwise, this email represents only the views of the sender and not the views of Silver Communities Pty Ltd.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060418/82340029/attachment-0001.html