[cisco-voip] MWI and Multi -Tenanting
Craig M Staffin
CMStaffin at ra.rockwell.com
Tue Apr 18 00:46:23 EDT 2006
or better yet change it at the gateway and CCM is none the wiser.
We do all of our digit manipulation at the gateway level.
I agree with you a solid dial plan solves so many problems
"Wydra, Jason" <jwydra at Burwood.com>
Sent by: cisco-voip-bounces at puck.nether.net
04/17/2006 11:38 PM
To: "Tim Medley" <medley at mac.com>, "Darren Smith"
<darren at silvercommunities.com.au>
cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI and Multi -Tenanting
Forgive my idiotic question and somewhat asinine comment but?? Why do so
many providers of IPT CCM service feel like they need to overlap
multi-tenant extensions? Are there not enough numbers??? Do we have an
issue like we sort-of have between IPV4 and IPV6. I doubt it?. Easy
solution is don't overlap dialplans by having a solid design from the get
go. If you have the same last four digits in the DID range then just call
telco and have them send 7 digits instead of four.
Jason Wydra
Consultant
burwood group, inc.
Phone: (312) 327-4677
Cell: (312) 493-2834
jwydra at burwood.com
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Medley
Sent: Monday, April 17, 2006 11:16 PM
To: Darren Smith
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI and Multi -Tenanting
Darren,
I've setup multi-tenant CCM systems several times. A couple of questions.
How do you have the MWI on/off DN's configured in CCM? Are they in the
same generic partition that your phone DN's are in? You will need to set
the MWI on/off numbers to a partition that all tenants have access to AND
the CSS that the Unity port(s) that are set for MWI will need access to
the Tenant Partitions.
tm
Tim Medley
medley at mac.com
On Apr 18, 2006, at 12:05 AM, Darren Smith wrote:
Hi,
Has anybody succesfully implemented MWI with multi tenanting on CCM 4.1.3
and Unity 4.0.5??
We have multiple customers on our callmanager and unity platform, some of
these are smaller business, ad each of these has their own Partitions, and
each of these partitions use the same DN range (eg 200x).
Other customers are in a generic partition, and their DN is their full DDI
number.
We have set the MWI numbers (Full 10 digit numbers), but cannot get MWI to
work.
The option for multi tenanting is set to turue within Callmanager
Messaging Interfaces services, but I'm sure I need some transaltion
patterns set, but can't work out what to do.
Thanks in advance
Regards
Darren Smith
Chief Operations Officer
Silver Communities
P 1300786755
D 0756575299
M 0405 847791
E darren at silvercommunities.com.au
DISCLAIMER: This email, together with any attachments, is intended for the
named recipient(s) only; and may contain privileged and confidential
information. If received in error, you are asked to inform the sender as
quickly as possible and delete this email and any copies of this from your
computer system network.
If not an intended recipient of this email, you must not copy, distribute
or take any action(s) that relies on it; any form of disclosure,
modification, distribution and /or publication of this email is also
prohibited.
Unless stated otherwise, this email represents only the views of the
sender and not the views of Silver Communities Pty Ltd.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060418/3a7914ef/attachment-0001.html
More information about the cisco-voip
mailing list