[cisco-voip] Transcoding Problems - 2821 router with PVDM2-48

Fedorov, Konstantin kfedor at amt.ru
Tue Apr 18 15:37:37 EDT 2006


Hi, Jason.

 

So how I understand Conf bridge located in the HQ,  and belong to the DP which doesn't contain transcoding resources ?

If so, insert this transcoding to the this DP.

 

Because when you call from remote location to the HQ phone, you use transcoding but when you initiate a conference, you take another resource and this resource

must also have knowledge where take transcoding.

 

Another way, configure dspfarm also like conf bridge.

 

-----------------------
Sincerely Yours,
Konstantin Fedorov

  _____  

From: Jason Evans [mailto:JEvans at glgroup.com] 
Sent: Tuesday, April 18, 2006 9:24 PM
To: Fedorov, Konstantin; Kevin Thorngren
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Transcoding Problems - 2821 router with PVDM2-48

 

Hi Konstantin,

 

Right now I'm speaking g711 across the WAN so they use CCM resources. I know - its not an efficient or scalable solution, but our remote offices started small and are now growing rapidly, therefore its now imperative that I speak a lower bw codec to the WAN sites. 

 

jason

 

  _____  

From: Fedorov, Konstantin [mailto:kfedor at amt.ru] 
Sent: Tuesday, April 18, 2006 12:11 PM
To: Jason Evans; Kevin Thorngren
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Transcoding Problems - 2821 router with PVDM2-48

 

Hi,

 

What conference bridge do you use for remote phones ??

 

Does this conf bridge belong to the DP which also have transcoding resources ?

 

-----------------------
Sincerely Yours,
Konstantin Fedorov

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060418/1b989cd1/attachment.html 


More information about the cisco-voip mailing list