[cisco-voip] PVDM requirement for PRI

Wed Apr 19 11:30:08 EDT 2006

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

That will show you what you need for any configuration. 

Court Schuett

Millward Brown
Network Systems Engineer
630-955-8983
court.schuett at us.millwardbrown.com

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Manoj Kalpage
Sent: Wednesday, April 19, 2006 10:23 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] PVDM requirement for PRI

Hi All,
Does anybody know what the minimum PVDM requirement is for T1
(VWIC-1MFT-T1) ? I have told by someone i need minimum PVDM-48 with
VWIC-1MFT-T1 module.
Thank you in advance.

Regards,
Manoj

________________________________________________________________________
___________
Manoj Kalpage, System Engineer | Computec Engineering Ltd., | Prince
Avenue Bldg, 7th Floor, 3-33 Kioicho, Chiyoda Ku, Tokyo 102-0094 |
direct: 03 3511 8274 | main: 03 3511 8190 | direct fax: 03 3511 8198 |
Mobile 090 849 15449  | manoj at computec.co.jp 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip