[cisco-voip] Question about phone time.

[Linsemier, Matthew]

Scott,

 

You will want to go into your Date / Time Group Configuration and make
sure that your CMLocal group's Time Zone is set appropriately.  It uses
the CCM's time, but then adjusts it with this setting.

 

Matt

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott O'Donnell
Sent: Wednesday, April 19, 2006 3:46 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Question about phone time.

 

I have a problem with the time display on phones registered to a new CM
4.1(3) server.

I have the CallManager server configured for NTP and it currently has
the correct time.

 

The phones are configured with the CMLocal time group but they display
the time incorrectly.

It is 1 hour ahead on the phones.

 

When the phone registered, doesn't just take the current time for the
callmanager server?

 

 


--------------------------------------------------------------------------------

CONFIDENTIALITY STATEMENT

This communication and any attachments are CONFIDENTIAL and may be 
protected by one or more legal privileges. It is intended solely
for the use of the addressee identified above. If you are not 
the intended recipient, any use, disclosure, copying or 
distribution of this communication is UNAUTHORIZED. Neither this 
information block, the typed name of the sender, nor anything 
else in this message is intended to constitute an electronic 
signature unless a specific statement to the contrary is 
included in this message. If you have received this communication in 
error, please immediately contact me and delete this communication from
your computer. Thank you.

--------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060419/eb8d9530/attachment.html