[cisco-voip] H.323 Error

[Jason Burton]

I'm having a problem getting inbound calling name to display on my H323 gateway.  I'm gettting the following message when i debug q931.  Anyone have any ideas?  It's a 2821 running 12.4(6)T
 
Thanks in advance!
 
 
Apr 19 21:47:24 EDT: ISDN Se1/0:23 Q931: RX <- SETUP pd = 8  callref = 0x01F1 
        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1 
        Facility i = 0x9F8B0100A10F02010106072A8648CE1500040A0100 
        Progress Ind i = 0x8283 - Origination address is non-ISDN  
        Calling Party Number i = 0x2183, '3176633279' 
                Plan:ISDN, Type:National 
        Called Party Number i = 0x80, '6090' 
                Plan:Unknown, Type:Unknown
Apr 19 21:47:24 EDT: ISDN Se1/0:23 Q931: TX -> CALL_PROC pd = 8  callref = 0x81F1 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1
Apr 19 21:47:24 EDT: ISDN Se1/0:23 Q931: TX -> ALERTING pd = 8  callref = 0x81F1 
        Progress Ind i = 0x8188 - In-band info or appropriate now available 
Apr 19 21:47:25 EDT: ISDN Se1/0:23 Q931: RX <- FACILITY pd = 8  callref = 0x01F1 
        Facility i = 0x9F8B0100A117020101020100800F504F54532050484F4E45202020494E
Apr 19 21:47:25 EDT: ISDN Se1/0:23 **ERROR**: Ux_BadMsg: Invalid Message for call state 7, call id 0x1A, call ref 0x81F1, event 0x62
Apr 19 21:47:25 EDT: ISDN Se1/0:23 Q931: TX -> STATUS pd = 8  callref = 0x81F1 
        Cause i = 0x80E262 - Message not compatible with call state or not implemented 
        Call State i = 0x07
Apr 19 21:47:33 EDT: ISDN Se1/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 0x01F1 
        Cause i = 0x8090 - Normal call clearing
Apr 19 21:47:33 EDT: ISDN Se1/0:23 Q931: TX -> RELEASE pd = 8  callref = 0x81F1
Apr 19 21:47:33 EDT: ISDN Se1/0:23 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x01F1