[cisco-voip] Integrating CCM and CCME

[Kevin Thorngren]

This link should help you to get started.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/ 
products_configuration_guide_chapter09186a00805b21fd.html#wp1057434

Kevin
On Apr 21, 2006, at 6:35 AM, Robert A. Bell wrote:

> Any advice on how to integrate sites using CCM and CCME?  I will have  
> a CCM at main office and CCME at remote location. Very small  
> deployment at the remote locations.  I’ve had some people say that I  
> should run everything off the CCM and you SRST, but for our  
> application I’m not sure that it is best.  We will have <T1 speeds  
> between sites, plus the remote sites will be mobile so there is always  
> the time it takes to reconnect everything at a remote site once it  
> moves.  
>  
> Any suggestions would be appreciated.  And sample scripts on the CCME  
> side would be very helpful.  I’ve never integrated the two systems  
> before.  What I’m assuming is I will need to configure my CCME routers  
> as gateways on the CCM side.  Thanks for any assistance!
>  
> B.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1524 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060421/567cf4c6/attachment.bin