[cisco-voip] Unity MWI port Question

[Simon, Bill]

I'm with you; I've seen this same behavior (only two MWI ports actually
used) and our MWI resynchs take about 6-7 hours for our 6000 subscribers.
It's really painful, and even if we schedule them to begin at midnight it's
still going when some users come in in the morning.
 

---
Bill Simon - bills at tns.its.psu.edu - (814) 865-2270
http://tns.its.psu.edu/ <http://tns.its.psu.edu/> 



 


  _____  

From: Ed Leatherman [mailto:ealeatherman at gmail.com] 
Sent: Tuesday, April 25, 2006 10:32 AM
To: cisco-voip at puck-nether.net Voip
Subject: [cisco-voip] Unity MWI port Question


Hello all,

Does anyone know how to make Unity (4.0) use more than 2-3 ports for MWI? I
have more than 3 ports configured in UTIM for MWI Dialout, but when I do a
MWI Resynch it still only uses up to 3 ports.. I'm not sure where else to
set this. The reason I ask is my MWI weirded out this morning and I had to
force it to resynch and its been going for 2 hours now.. watching it in the
part status monitor window and I think new change requests are just getting
queued up behind the resynch job. 

Thanks!
-- 
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060425/50f36535/attachment.html