[cisco-voip] how to create a software loopback

[James Grace]

I have a remote site that is down.  This is a cme.  Im able to get into the
gw, and I see that the t1 controller is in a down state.  Is the way for me
to determine if the card is bad or good by doing some type of loopback
config on the gw.  I am remote to the gw.  I think it's a cable issue,  but
want to be sure it not a dead t1 controller card

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060425/9ebdbfbc/attachment.html