[cisco-voip] Installing Unity from MCS Hardware Detection Disk Set?

Scott O'Donnell sodonnell at CCSINET.com
Wed Apr 26 17:36:09 EDT 2006


Wes,
 
Thanks for the reply.
I attempted an install from an MS Disk but so many of the devices showed
up in Device manage as unknown, I figured I could get a stable install
off the MCS disks.
I'll go back to the MS Disks and fight through it.
 
BTW: My understanding was that the MCS install was a vanilla install
with specific services disabled.
        What else makes it so different?
 
Scott
 

________________________________

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Wednesday, April 26, 2006 4:44 PM
To: Scott O'Donnell
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Installing Unity from MCS Hardware Detection
Disk Set?


the win-OS disks (2000.2.7, 2000.4.1, 2000.4.3) are for CM, PA, CRA, CER
only.  Unity is not supported with those OS disks.

Unity does have platform configuration disks that ship with a different
(full featured) version of windows.

You will need to use the windows install disk that comes with unity or
one directly from MS.

/Wes

Scott O'Donnell wrote: 

	Has anyone installed Unity using the disk set for installing MCS
servers?
	I have a customer that is providing the Windows Licensing for
Unity but when installing from their CD, the 7815 I'm installing for
Unity shows up with a load of unknown devices.
	Is there anything installed (or not installed) with the MCS
image install that will screw Unity up and cause it not to work?
	 
	 
	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060426/4da97f73/attachment.html 


More information about the cisco-voip mailing list