[cisco-voip] Voice Mail down during AAR

[Wes Sisk]

what version of CM are you on? CSCeg79745

/Wes

Robin H wrote:
> I have enabled AAR and it works fine, but when the remote user is not
> answering the call, the caller got engage tone after ring timeout. I
> have configured following items:
>
> - set External Number Mask on IP Phones (both central and remote
> sites), and voicemail ports
> - set "Use Calling Party's External Phone Number Mask on all route patterns
> - set RDNIS outgoing on remote gateway and RDNIS incoming at central gateway
> - set AAR CSS on both central and remote site gateways/ip phones, and
> also voicemail ports
> - AAR Group: A -> B = prefix 91, B -> A = prefix 91
> - Apply AAR Group on central and remote site phone DNs, and also
> voicemail port DNs
>
> Is there any other parameters that I miss out? Thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>