[cisco-voip] TCP/UDP ports used by CCM3.3
Voll, Scott
Scott.Voll at wesd.org
Thu Apr 27 10:43:29 EDT 2006
I believe the range and ports can only go at the end so the first one
would be right.
Scott
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robin H
Sent: Thursday, April 27, 2006 6:44 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] TCP/UDP ports used by CCM3.3
I read document for TCP/UDP ports used by Cisco CallManager 3.3 but
still not sure how to apply the ACL to match the requirement for
marking RTP packets.
In the document, it is stated for RTP uses "Remote Source Port" and
"Remote Device Destination Port" value UDP 16384 - 32767 so when I
want to use LLQ for outgoing ACL at remote gateway to match it, which
one is correct?
1. access-list 100 permit udp any any range 16384 32767
2. access-list 100 permit udp any any range 16384 32767
access-list 100 permit udp any range 16384 32767 any
Anyone can enlighten me? thanks
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list