[cisco-voip] Recieved Calls List Digits Lose Prefix

[Fedorov, Konstantin]

Hi, Ruben.

 

No, you cann't use translations on GW with MGCP, but

You can prefix incoming calls on the CCM inside GW configuration ( not
only with Translation pattern)

 

Gateway configuration page :

Call Routing Information 

  Inbound calls 

    Prefix DN

 

Sorry, my previous answer is not full.

-----------------------
Sincerely Yours,
Konstantin Fedorov

  _____  

From: Ruben Montes (EU) [mailto:Ruben.Montes at eu.didata.com] 
Sent: Tuesday, August 01, 2006 3:41 PM
To: Fedorov, Konstantin; Nick Kassel; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Recieved Calls List Digits Lose Prefix

 

Konstantin,

 

do you mean that if I put the same config as Nick in my MGCP gateway it
will work? Some time ago I did some testing to modify the calling number
of the calls through Translations Profiles in the gateway with no
success...

Do you have this config running?

 

Thanks in advance,

 

Ruben

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060801/f2a7402a/attachment-0001.html