[cisco-voip] Rebuild server with diferent name

[Lelio Fulgenzi]

I would also consider buying CM reports. This documents your entire system in case of disaster recovery, which in this case, it is not, but you can not backup and restore things like route patterns, etc. You have to build them again as far as I know.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Ryan Ratliff 
  To: Anthony Kouloglou 
  Cc: cisco-voip at puck-nether.net 
  Sent: Wednesday, August 02, 2006 10:10 AM
  Subject: Re: [cisco-voip] Rebuild server with diferent name


  You can use BAT but it will still be a pain since you can only export  
  one device type at a time.

  -Ryan

  On Aug 2, 2006, at 9:53 AM, Anthony Kouloglou wrote:

  Hi all,
  due to an "_" underscore in the name of  a CCM 4.1.3, i need to rebuild
  the server (i have many problems with that shit!!).
  What is the best practice to copy to the new server with the different
  name: old devices, users device profiles etc?
  -I know i cannot do it with BARS (the name of the ccm changes so it is
  not usefull)
  - For the same reasons i cannot use the BAT or is it possible?

  Thanks,
  Akoul
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060802/471d9b47/attachment-0001.html