[cisco-voip] Rebuild server with diferent name
Lelio Fulgenzi
lelio at uoguelph.ca
Wed Aug 2 11:59:56 EDT 2006
http://www.cmreports.com/shop/
We're still getting it to work, but I like it.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: Anthony Kouloglou
To: Lelio Fulgenzi
Cc: Ryan Ratliff ; cisco-voip at puck-nether.net
Sent: Wednesday, August 02, 2006 11:21 AM
Subject: Re: [cisco-voip] Rebuild server with diferent name
What exactly are CM reports? i did not get it :-(
Thanks
Akoul
Lelio Fulgenzi wrote:
I would also consider buying CM reports. This documents your entire system in case of disaster recovery, which in this case, it is not, but you can not backup and restore things like route patterns, etc. You have to build them again as far as I know.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: Ryan Ratliff
To: Anthony Kouloglou
Cc: cisco-voip at puck-nether.net
Sent: Wednesday, August 02, 2006 10:10 AM
Subject: Re: [cisco-voip] Rebuild server with diferent name
You can use BAT but it will still be a pain since you can only export
one device type at a time.
-Ryan
On Aug 2, 2006, at 9:53 AM, Anthony Kouloglou wrote:
Hi all,
due to an "_" underscore in the name of a CCM 4.1.3, i need to rebuild
the server (i have many problems with that shit!!).
What is the best practice to copy to the new server with the different
name: old devices, users device profiles etc?
-I know i cannot do it with BARS (the name of the ccm changes so it is
not usefull)
- For the same reasons i cannot use the BAT or is it possible?
Thanks,
Akoul
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060802/e909c120/attachment.html
More information about the cisco-voip
mailing list