[cisco-voip] Billing Software
olubunmi
isinkaye at yahoo.com
Mon Aug 7 13:41:28 EDT 2006
I need to implement a CCM Primary and Subscriber for aout 100 users. I need a good recommendation for Billing. Can one do without a 3rd party , or do we have a standalone 3rd party product with reasonable pricing. I am not using a gatekeeper here
regards
Bunmi
cisco-voip-request at puck.nether.net wrote:
Send cisco-voip mailing list submissions to
cisco-voip at puck.nether.net
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-request at puck.nether.net
You can reach the person managing the list at
cisco-voip-owner at puck.nether.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: transcoding from g711 to g729 with CME (Hinson, Greg)
2. Re: transcoding from g711 to g729 with CME (Ted Nugent)
3. Re: transcoding from g711 to g729 with CME (Hinson, Greg)
----------------------------------------------------------------------
Message: 1
Date: Sat, 5 Aug 2006 14:57:25 -0500
From: "Hinson, Greg"
Subject: Re: [cisco-voip] transcoding from g711 to g729 with CME
To: "Hinson, Greg" , "Jimmy Pale"
,
Message-ID:
<472D0CBC7B31C1499B77C1DAA3308B3BF3D5BF at EXCHANGEDS01.ds.ad.adp.com>
Content-Type: text/plain; charset="us-ascii"
correction, dial-peer 4 was changed from 729 to 711 as you see below, in
attempt to get a call-forward-no answer to work in pure 711, end-to-end
from CCM to CME. That also fails, in both 711 and 729 modes. Originally,
dial-peer 4 was also set to g729*(along with dial-peer 3) to try and
force transcoding when call forward - VM was enabled
-Greg
-----Original Message-----
From: Hinson, Greg
Sent: Saturday, August 05, 2006 12:55 PM
To: 'Jimmy Pale'; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] transcoding from g711 to g729 with CME
I match dial-peer 4 on the inbound leg destined for CME phone. I match
dial-peer 3 if I dial the pilot point directly for Unity Express, 8100.
Both outbound legs use dial-peer 8100, below. Below the config is sh
dspfarm all, indicating the status of the dsp's.
-Greg
CME Config-----------------------------------------------
sccp local GigabitEthernet0/0.200
sccp ccm 10.200.1.253 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 10 register mtp0015fad84570
!
dspfarm profile 10 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729r8
codec g729abr8
codec g729br8
maximum sessions 18
associate application SCCP
!
telephony-service
ip source-address 10.200.1.253 port 2000
sdspfarm units 1
sdspfarm transcode sessions 48
sdspfarm tag 1 mtp0015fad84570
dial-peer voice 3 voip
incoming called-number .
codec g729r8
!
dial-peer voice 4 voip
destination-pattern ^20..$
session target ras
codec g711ulaw
!
dial-peer voice 8100 voip
destination-pattern ^8100$
session protocol sipv2
session target ipv4:10.30.1.252
dtmf-relay sip-notify
codec g711ulaw
no vad
Show dspfarm all------------------------------------
Dspfarm Profile Configuration
Profile ID = 10, Service = TRANSCODING, Resource ID = 1
Profile Description :
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 18
Number of Resource Available : 18
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729r8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Codec : g729br8, Maximum Packetization Period : 60
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED
PKTS_RXED
0 1 4.4.19 UP N/A FREE xcode 1 - - -
0 1 4.4.19 UP N/A FREE xcode 1 - - -
0 1 4.4.19 UP N/A FREE xcode 1 - - -
0 1 4.4.19 UP N/A FREE xcode 1 - - -
0 1 4.4.19 UP N/A FREE xcode 1 - - -
0 1 4.4.19 UP N/A FREE xcode 1 - - -
0 2 4.4.19 UP N/A FREE xcode 1 - - -
0 2 4.4.19 UP N/A FREE xcode 1 - - -
0 2 4.4.19 UP N/A FREE xcode 1 - - -
0 2 4.4.19 UP N/A FREE xcode 1 - - -
0 2 4.4.19 UP N/A FREE xcode 1 - - -
0 2 4.4.19 UP N/A FREE xcode 1 - - -
0 3 4.4.19 UP N/A FREE xcode 1 - - -
0 3 4.4.19 UP N/A FREE xcode 1 - - -
0 3 4.4.19 UP N/A FREE xcode 1 - - -
0 3 4.4.19 UP N/A FREE xcode 1 - - -
0 3 4.4.19 UP N/A FREE xcode 1 - - -
0 3 4.4.19 UP N/A FREE xcode 1 - - -
Total number of DSPFARM DSP channel(s) 18
-Greg
-----Original Message-----
From: Jimmy Pale [mailto:voipjockey at gmail.com]
Sent: Saturday, August 05, 2006 6:14 AM
To: Hinson, Greg; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] transcoding from g711 to g729 with CME
Greg,
Can you provide an excerpts of the pertinent config?
Thanks
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Hinson, Greg
Sent: Saturday, August 05, 2006 12:20 AM
To: Ted Nugent; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] transcoding from g711 to g729 with CME
Seems like the issue is centric around CME's "Media Resource Manager"
not calling upon the configured DSP's when they are needed.
-Greg
-----Original Message-----
From: Hinson, Greg
Sent: Friday, August 04, 2006 10:17 PM
To: Hinson, Greg; Ted Nugent; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] transcoding from g711 to g729 with CME
" but at least I know its getting out of ccm, through the gatekeeper
intact, and over to CUE, as it matches the same outbound dial-peer that
a local CME phone matches when going to voicemail."
In my last email above, I meant to say I know its going to CME, not CUE,
as "not going to CUE" has been the problem all along. (heheh)
-Greg
-----Original Message-----
From: Hinson, Greg
Sent: Friday, August 04, 2006 10:14 PM
To: 'Ted Nugent'; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] transcoding from g711 to g729 with CME
i ran "show sdspfarm units" and the dspfarm does show registered with
the MAC associated with the sccp interface I am bound to, and that also
matches what I configured in telephony service. a "show sdspfarm
sessions" shows the correct number of allocated streams configured in
telephony-service, all of which are idle.
As far as dialing the pilot directly, here's what I discovered. In
12.4.3 IOS, the virtual efxs devices in CME auto-register to the
gatekeeper so I didn't have to predefine them. That allowed calls from
CCM to CME to work. I am also using a default-technology prefix to route
calls the opposite direction to CCM from CME, which also works great for
this application(small scale-1 GK & CCM cluster). Since the gatekeeper
doesn't know about my pilot point for CUE, I predefined a gw-type prefix
in the gatekeeper and hard-coded the CME router's ip address for its
destination. I also created a route pattern for the CUE pilot point in
callmanager that points to the h225-gatekeeper controlled trunk. the
call still fails with a fast busy, but at least I know its getting out
of ccm, through the gatekeeper intact, and over to CUE, as it matches
the same outbound dial-peer that a local CME phone matches when going to
voicemail.
-Greg
-----Original Message-----
From: Ted Nugent [mailto:tednugent69 at yahoo.com]
Sent: Friday, August 04, 2006 9:42 PM
To: Hinson, Greg; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] transcoding from g711 to g729 with CME
Exact same issue I faced... Oringally I had my codec
voice class to allow g711 and g729. As soon as I
pulled out g711 it worked fine. If you do sho sdspfarm
stat and sess does it sho all is registerd fine then?
Do you get the same issue if you call the pilot
direct?
--- "Hinson, Greg" wrote:
> thanks for the reply. debug voip dial-peer does show
> the right dial-peer
> matches. The WAN is forced to codec 729, as well as
> the sip dial-peer
> for unity forced to g711ulaw. I also added
> transfer-pattern .T to
> telephony-service. cme phone to cme phone cfa to VM
> always works great,
> as well as enterprise to cme if the codecs are
> forced to g711ulaw
> end-to-end. it only fails when g729 is added to the
> region and wan
> dial-peers. also, when i run debug dspfarm, I see no
> activity on the
> output during the attempt, as if the CME's Media
> Resource Manager is not
> even being called to provide transcoding.
>
> -Greg
>
>
> -----Original Message-----
> From: Ted Nugent [mailto:tednugent69 at yahoo.com]
> Sent: Friday, August 04, 2006 8:12 PM
> To: Hinson, Greg; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] transcoding from g711 to
> g729 with CME
>
> Yes, I've had the exact same problem and finally
> figured it out.
> First of make sure your matching your inbound (from
> WAN) and outbound (to CUE) DPs... (debug voip
> dialpeer
> all). If not make sure your translation rules are
> right or tranfer-pattern .T is added in tel-serv.
> Most
> importantly make sure you lock in your WAN DP to
> G729... if you use a voice class with G711 it will
> never work even if G729 is prefered first.
>
>
> HTH
> Ted
>
>
> --- "Hinson, Greg" wrote:
>
> > I have a client that is using CME at a remote
> store
> > and Enterprise
> > CallManager at the host location. I have regions
> > setup, forcing the
> > calls destined for the remote location to g729.
> The
> > CME hardware is a
> > 2821 platform running 12.3.14T7 spservices IOS
> with
> > an NM-CUE module.
> > Using a gatekeeper to interconnect the two
> > callmanagers, I can
> > successfully negotiate a g729 call across the
> > network, but on a CME
> > call-forward-no answer condition to Unity Express,
> > the call drops with a
> > fast busy. I followed the guidelines referenced in
> > the doc below for
> > creating a dspfarm/sccp profiles and its
> assignment
> > to
> > telephony-service, but with no success. I also
> > upgraded the IOS to
> > 12.4.3, thinking it was an incompatibility issue
> > with 12.3.14, and I
> > have the same problem. Any ideas?
> >
> >
> >
>
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5207/products_
> > feature_guide_chapter09186a00802d255d.html
> >
> >
> >
> > -Greg
> >
> >
> >
> > This message and any attachments are intended only
> > for the use of the addressee and may contain
> > information that is privileged and confidential.
> If
> > the reader of the message is not the intended
> > recipient or an authorized representative of the
> > intended recipient, you are hereby notified that
> any
> > dissemination of this communication is strictly
> > prohibited. If you have received this
> communication
> > in error, please notify us immediately by e-mail
> and
> > delete the message and any attachments from your
> > system.
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
>
>
> This message and any attachments are intended only
> for the use of the addressee and may contain
> information that is privileged and confidential. If
> the reader of the message is not the intended
> recipient or an authorized representative of the
> intended recipient, you are hereby notified that any
> dissemination of this communication is strictly
> prohibited. If you have received this communication
> in error, please notify us immediately by e-mail and
> delete the message and any attachments from your
> system.
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential.
If the reader of the message is not the intended recipient or an
authorized
representative of the intended recipient, you are hereby notified that
any
dissemination of this communication is strictly prohibited. If you have
received this communication in error, please notify us immediately by
e-mail
and delete the message and any attachments from your system.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
------------------------------
Message: 2
Date: Sat, 5 Aug 2006 14:10:20 -0700 (PDT)
From: Ted Nugent
Subject: Re: [cisco-voip] transcoding from g711 to g729 with CME
To: "Hinson, Greg" , Jimmy Pale
, cisco-voip at puck.nether.net
Message-ID: <20060805211020.30636.qmail at web36104.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Here's a working config from my lab, the only
difference is this is from a 3725 and your running an
ISR I'm guessing
Check
call-forward pattern .T
in Tele-serv
!
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
!
!
!
voice class codec 1
codec preference 1 g729r8
!
voice translation-rule 4
rule 1 /^81/ /14082121/
rule 2 /^83/ /19724563/
rule 3 /^91/ /1/
!
!
voice translation-profile gk-outbound
translate called 4
!
ial-peer voice 2600 voip
destination-pattern 2[126]..
session protocol sipv2
session target ipv4:192.168.7.6
dtmf-relay sip-notify
codec g711ulaw
no vad
!
!
dial-peer voice 2000 voip
translation-profile outgoing gk-outbound
destination-pattern 8[13]...
voice-class codec 1
session target ras
incoming called-number .
tech-prefix 1#
dtmf-relay h245-alphanumeric
ip qos dscp cs3 signaling
no vad
!
sccp local FastEthernet0/0.7
sccp
sccp ccm 192.168.7.5 priority 1
!
dspfarm transcoder maximum sessions 4
dspfarm
!
telephony-service
sdspfarm units 2
sdspfarm transcode sessions 4
sdspfarm unregister force
sdspfarm tag 1 mtp000c85084a20
dialplan-pattern 1 85222332... extension-length 4
call-forward pattern .T
--- "Hinson, Greg" wrote:
> correction, dial-peer 4 was changed from 729 to 711
> as you see below, in
> attempt to get a call-forward-no answer to work in
> pure 711, end-to-end
> from CCM to CME. That also fails, in both 711 and
> 729 modes. Originally,
> dial-peer 4 was also set to g729*(along with
> dial-peer 3) to try and
> force transcoding when call forward - VM was enabled
>
> -Greg
>
>
> -----Original Message-----
> From: Hinson, Greg
> Sent: Saturday, August 05, 2006 12:55 PM
> To: 'Jimmy Pale'; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] transcoding from g711 to
> g729 with CME
>
> I match dial-peer 4 on the inbound leg destined for
> CME phone. I match
> dial-peer 3 if I dial the pilot point directly for
> Unity Express, 8100.
> Both outbound legs use dial-peer 8100, below. Below
> the config is sh
> dspfarm all, indicating the status of the dsp's.
>
> -Greg
>
>
> CME
>
Config-----------------------------------------------
> sccp local GigabitEthernet0/0.200
> sccp ccm 10.200.1.253 identifier 1
> sccp
> !
> sccp ccm group 1
> associate ccm 1 priority 1
> associate profile 10 register mtp0015fad84570
> !
> dspfarm profile 10 transcode
> codec g711ulaw
> codec g711alaw
> codec g729ar8
> codec g729r8
> codec g729abr8
> codec g729br8
> maximum sessions 18
> associate application SCCP
> !
> telephony-service
> ip source-address 10.200.1.253 port 2000
> sdspfarm units 1
> sdspfarm transcode sessions 48
> sdspfarm tag 1 mtp0015fad84570
>
> dial-peer voice 3 voip
> incoming called-number .
> codec g729r8
> !
> dial-peer voice 4 voip
> destination-pattern ^20..$
> session target ras
> codec g711ulaw
> !
> dial-peer voice 8100 voip
> destination-pattern ^8100$
> session protocol sipv2
> session target ipv4:10.30.1.252
> dtmf-relay sip-notify
> codec g711ulaw
> no vad
>
> Show dspfarm all------------------------------------
> Dspfarm Profile Configuration
>
> Profile ID = 10, Service = TRANSCODING, Resource ID
> = 1
> Profile Description :
> Profile Admin State : UP
> Profile Operation State : ACTIVE
> Application : SCCP Status : ASSOCIATED
> Resource Provider : FLEX_DSPRM Status : UP
> Number of Resource Configured : 18
> Number of Resource Available : 18
> Codec Configuration
> Codec : g711ulaw, Maximum Packetization Period : 30
>
> Codec : g711alaw, Maximum Packetization Period : 30
>
> Codec : g729ar8, Maximum Packetization Period : 60
> Codec : g729r8, Maximum Packetization Period : 60
> Codec : g729abr8, Maximum Packetization Period : 60
>
> Codec : g729br8, Maximum Packetization Period : 60
>
>
> SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID
> BRIDGE_ID PKTS_TXED
> PKTS_RXED
>
> 0 1 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 1 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 1 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 1 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 1 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 1 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 2 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 2 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 2 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 2 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 2 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 2 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 3 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 3 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 3 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 3 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 3 4.4.19 UP N/A FREE xcode 1 -
> - -
>
> 0 3 4.4.19 UP N/A FREE xcode 1 -
> - -
>
>
> Total number of DSPFARM DSP channel(s) 18
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> -Greg
>
> -----Original Message-----
> From: Jimmy Pale [mailto:voipjockey at gmail.com]
> Sent: Saturday, August 05, 2006 6:14 AM
> To: Hinson, Greg; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] transcoding from g711 to
> g729 with CME
>
> Greg,
>
> Can you provide an excerpts of the pertinent config?
>
> Thanks
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Hinson, Greg
> Sent: Saturday, August 05, 2006 12:20 AM
> To: Ted Nugent; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] transcoding from g711 to
> g729 with CME
>
> Seems like the issue is centric around CME's "Media
> Resource
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
------------------------------
Message: 3
Date: Sat, 5 Aug 2006 16:16:34 -0500
From: "Hinson, Greg"
Subject: Re: [cisco-voip] transcoding from g711 to g729 with CME
To: "Ted Nugent"
Cc: cisco-voip at puck.nether.net
=== message truncated ===
---------------------------------
Do you Yahoo!?
Next-gen email? Have it all with the all-new Yahoo! Mail Beta.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060807/18dc7bf1/attachment-0001.html
More information about the cisco-voip
mailing list