[cisco-voip] PRI config with Adtran Atlas 550

[Philip Walenta]

I've done this numerous times.
 
First things first, are you using a crossover cable?


  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Burton
Sent: Monday, August 07, 2006 8:17 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] PRI config with Adtran Atlas 550


 Has anyone had any luck configuring a PRI into a cisco router using an
Atran Atlas 550?  I've followed adtrans docs, but I can't the the T1
interface on the router to even see a carrier.  The ISDN Layer 1 status on
the the router shows DEACTIVATED.  any help?
 
Thanks in advance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060807/9baaf866/attachment.html