[cisco-voip] Setting up local DSP resources on 2821
Ortiz, Carlos
CORTIZ at broward.org
Tue Aug 8 10:53:20 EDT 2006
This seems to be case according to the DSP calc. This location is using
a PRI, but they could easily operate with 8-12 voice channels. Is it
possible to free up some DSP's and use less channels for voice
termination?
Carlos
-----Original Message-----
From: Ted Nugent [mailto:tednugent69 at yahoo.com]
Sent: Tuesday, August 08, 2006 8:54 AM
To: Ortiz, Carlos; Ryan Ratliff
Cc: Erik Erasmus (E); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Setting up local DSP resources on 2821
None, so thats your problem.. I'd check the DSP Calc
and confirm your numbers but it sounds like you need
another PVDM to add the conferencing.
--- "Ortiz, Carlos" <CORTIZ at broward.org> wrote:
> No, just the PVDM2-32. I'm going to check the DSP
> calculator next, but
> how many DSP's would this config leave me with? Here
> is the full sh
> diag:
>
> Lowrise#sh diag
> Slot 0:
> C2811 Motherboard with 2FE and integrated
> VPN Port adapter, 2
> ports
> Port adapter is analyzed
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> PCB Serial Number : FOC1016457N
> Hardware Revision : 1.0
> Top Assy. Part Number : 800-26920-01
> Board Revision : A0
> Deviation Number : 0
> Fab Version : 03
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Processor type : 87
> Hardware date code : 20060424
> Chassis Serial Number : FTX1020A5KQ
> Chassis MAC Address : 0017.95aa.9750
> MAC Address block size : 24
> CLEI Code : CNMJ7P0BRB
> Product (FRU) Number : CISCO2811
> Part Number : 73-10258-03
> Version Identifier : V02
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF C1 8B 46 4F 43 31 30 31 36 34
> 35 37 4E 40
> 0x10: 03 E7 41 01 00 C0 46 03 20 00 69 28
> 01 42 41 30
> 0x20: 88 00 00 00 00 02 03 03 00 81 00 00
> 00 00 04 00
> 0x30: 09 87 83 01 32 19 08 C2 8B 46 54 58
> 31 30 32 30
> 0x40: 41 35 4B 51 C3 06 00 17 95 AA 97 50
> 43 00 18 C6
> 0x50: 8A 43 4E 4D 4A 37 50 30 42 52 42 CB
> 8F 43 49 53
> 0x60: 43 4F 32 38 31 31 20 20 20 20 20 20
> 82 49 28 12
> 0x70: 03 89 56 30 32 20 D9 02 40 C1 FF FF
> FF FF FF FF
>
> PVDM Slot 0:
> 32-channel (G.711) Voice/Fax PVDMII DSP SIMM
> PVDM daughter card
> Hardware Revision : 4.0
> Part Number : 73-8539-05
> Board Revision : A0
> Deviation Number : 0
> Fab Version : 04
> PCB Serial Number : FOC101818WH
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Processor type : 00
> Product (FRU) Number : PVDM2-32
> Version Identifier : V01
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 03 EE 41 04 00 82 49 21 5B
> 05 42 41 30
> 0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43
> 31 30 31 38
> 0x20: 31 38 57 48 03 00 81 00 00 00 00 04
> 00 09 00 CB
> 0x30: 88 50 56 44 4D 32 2D 33 32 89 56 30
> 31 20 D9 02
> 0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
>
> WIC Slot 0:
> FT1 PMC4351
> Hardware Revision : 1.2
> PCB Serial Number : FOC10173EL3
> Part Number : 73-8346-05
> Board Revision : A0
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Deviation Number : 0-0
> Product (FRU) Number : WIC-1DSU-T1-V2
>
> Top Assy. Part Number : 800-22193-03
> CLEI Code : IPUIAPRRAA
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 00 52 41 01 02 C1 8B 46 4F
> 43 31 30 31
> 0x10: 37 33 45 4C 33 82 49 20 9A 05 42 41
> 30 03 00 81
> 0x20: 00 00 00 00 04 00 80 00 00 00 00 CB
> 94 57 49 43
> 0x30: 2D 31 44 53 55 2D 54 31 2D 56 32 20
> 20 20 20 20
> 0x40: 20 C0 46 03 20 00 56 B1 03 C6 8A 49
> 50 55 49 41
> 0x50: 50 52 52 41 41 FF FF FF FF FF FF FF
> FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
>
> WIC Slot 1:
> T1 (1 port) Multi-Flex Trunk WAN daughter
> card
> Hardware revision 1.0 Board
> revision B0
> Serial number 34799286 Part number
> 800-03568-04
> FRU Part Number VWIC-1MFT-T1=
> Test history 0x0 RMA number
> 00-00-00
> Connector type PCI
> EEPROM format version 1
> EEPROM contents (hex):
> 0x20: 01 20 01 00 02 12 FE B6 50 0D F0 04
> 00 00 00 00
> 0x30: 58 00 00 00 06 04 27 00 FF FF FF FF
> FF FF FF FF
>
> -----Original Message-----
> From: Ted Nugent [mailto:tednugent69 at yahoo.com]
> Sent: Monday, August 07, 2006 4:26 PM
> To: Ortiz, Carlos; Ryan Ratliff
> Cc: Erik Erasmus (E); cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Setting up local DSP
> resources on 2821
>
> Are you showing the PVDM2-16 as well?
> You can try changing the codec complexity but I
> believe this is already the default
>
> voice-card 0
> codec complexity flex
>
>
> Here's a "snippet" from the DSP calc
>
> ======================
> voice-card 0
> codec complexity flex
>
> Set of Conferencing/Transcoding commands when used
> with PVDM2-XX DSPs:
> sccp local <local interface>
> sccp ccm <call manager IP address> identifier <ccm
> ID
> #> version <version #>
> sccp
> !
> sccp ccm group 999
> bind interface <local interface>
> associate ccm <ccm ID #> priority 1
> associate profile <conferencing profile ID #>
> register <conference bridge name>
> associate profile <transcoding profile ID #>
> register <transcoder name>
> !
> dspfarm profile <transcoding profile ID #> transcode
>
> maximum sessions 4
> associate application SCCP
>
> dspfarm profile <conferencing profile ID #>
> conference
>
> maximum sessions 2
> associate application SCCP
>
> ====================
>
>
>
>
>
> --- "Ortiz, Carlos" <CORTIZ at broward.org> wrote:
>
> > In this case I am configuring a 2811 running
> > 12.4(9)T. The show diag
> > shows me this whick makes sense since I ordered
> the
> > PVDM 16 to 32
> > upgrade :
> >
> > PVDM Slot 0:
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the cisco-voip
mailing list