[cisco-voip] RS232 cable pinout for Cisco 7914 module

[Jim McBurnett]

I just checked one and it is 6 wire..
And a straight thru connection.

Later,
J 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Juan Pablo Romero - IFX AR
Sent: Friday, August 11, 2006 8:56 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RS232 cable pinout for Cisco 7914 module
Importance: High

I'm afraid that information belongs to the RJ45 network ports (which are named SW & PC) I'm looking for the pinout of the RJ12 RS232 port that is used to connect the 7960 with a 7914 module.
I would really appreciate if anyone could have a look at the cable and tell me how it is made.
Thanks,

JP


-----Mensaje original-----
De: Dixon, Wayne [mailto:wcdixo at aurora.lib.il.us] Enviado el: Thursday, August 10, 2006 10:23 PM
Para: jpablo.romero at ifxnw.com.ar; cisco-voip at puck.nether.net
Asunto: RE: [cisco-voip] RS232 cable pinout for Cisco 7914 module

I found this:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_
guide_chapter09186a008024d84c.html#wp1010474

Since it's an RJ11 jack... I'd assume using a standard phone cable plus a 9 pin Serial to RJ11 adapter would do the trick...

Wayne
 


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of jpablo.romero at ifxnw.com.ar
Sent: Thursday, August 10, 2006 8:09 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RS232 cable pinout for Cisco 7914 module


Thanks for your help, but the problem is that the only cable I had is lost, that´s why I´m posting this message to the list, to see if someone could help with this information which I couldn´t find at Cisco web site.

> I don't have a cable in front of me, but you should be able to tell by 
> looking at the colors and seeing if they are straight through.  If you 
> have a cable tester capable of doing a wire map you could see what the 
> cable is doing.
>
> On 8/10/06, Juan Pablo Romero - IFX AR <jpablo.romero at ifxnw.com.ar>
> wrote:
>>
>> Could anyone send me the pinout for the RS232 cable that the 7914 
>> uses to connect against a 7960?
>> Thanks,
>>
>> JP



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip