[cisco-voip] how do you recofig a 7920 after you having up andruning

[Turpin, Mark]

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/w
ip7920/user/3_3/7920wrl.htm

 

By the way, it is a lot easier to configure them if you have the base &
connect via USB.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Friday, August 11, 2006 10:18 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how do you recofig a 7920 after you having up
andruning

 

 

how do you recofig a 7920 after you having up and running

 

we have a 7920 that up and running but we need to change the ssid but
can not get to it 

 

 

James D. Grace 

CCNP CCNA MCSE MCSA 

Digitel Corporation

System Engineer / Professional Svc.

MSN messenger ID:  jgrace29 at hotmail.com

Mac IChat ID:  jgrace29 at mac.com 
 
This electronic message is from a law firm. It may contain confidential or privileged information. If you received this transmission in error, please reply to the sender to advise of the error and delete this transmission and any attachments.
 
IRS Circular 230 Disclosure: To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. federal tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing, or recommending to another party any transaction or matter addressed herein.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060811/305a7724/attachment-0001.html