[cisco-voip] RS232 cable pinout for Cisco 7914 module

[Jason Burwell]

Juan,

    It appears to be straight through-

Both sides are the same-

Pin1-Black
Pin2-Red
Pin3-Black
Pin4-Green
Pin5-Blue
Pin6-White

Hope this helps!
Jason

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Juan Pablo Romero - IFX AR
Sent: Friday, August 11, 2006 8:56 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RS232 cable pinout for Cisco 7914 module
Importance: High

I'm afraid that information belongs to the RJ45 network ports (which are
named SW & PC)
I'm looking for the pinout of the RJ12 RS232 port that is used to connect
the 7960 with a 7914 module.
I would really appreciate if anyone could have a look at the cable and tell
me how it is made.
Thanks,

JP


-----Mensaje original-----
De: Dixon, Wayne [mailto:wcdixo at aurora.lib.il.us] 
Enviado el: Thursday, August 10, 2006 10:23 PM
Para: jpablo.romero at ifxnw.com.ar; cisco-voip at puck.nether.net
Asunto: RE: [cisco-voip] RS232 cable pinout for Cisco 7914 module

I found this:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_
guide_chapter09186a008024d84c.html#wp1010474

Since it's an RJ11 jack... I'd assume using a standard phone cable plus a 9
pin Serial to RJ11 adapter would do the trick...

Wayne
 


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
jpablo.romero at ifxnw.com.ar
Sent: Thursday, August 10, 2006 8:09 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RS232 cable pinout for Cisco 7914 module


Thanks for your help, but the problem is that the only cable I had is lost,
that´s why I´m posting this message to the list, to see if someone could
help with this information which I couldn´t find at Cisco web site.

> I don't have a cable in front of me, but you should be able to tell by 
> looking at the colors and seeing if they are straight through.  If you 
> have a cable tester capable of doing a wire map you could see what the 
> cable is doing.
>
> On 8/10/06, Juan Pablo Romero - IFX AR <jpablo.romero at ifxnw.com.ar> 
> wrote:
>>
>> Could anyone send me the pinout for the RS232 cable that the 7914 
>> uses to connect against a 7960?
>> Thanks,
>>
>> JP



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
*******************************************************************
***
The information transmitted is intended only for the person or
entity to which it is
addressed and may contain confidential and/or privileged material.
Any review,
retransmission, dissemination or other use of, or taking of any
action in reliance upon,
this information by persons or entities other than the intended
recipient is prohibited.
If you received this in error, please contact the sender and delete
the material from
any computer. 
*******************************************************************
***