[cisco-voip] H323 Ports hang

[Teodor Georgiev]

You should configure proper call (answer & disconnect) supervision on the FXO ports.
Your issue has nothing to do with H323 :)

Read this article and you will get the whole picture:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

hth

  ----- Original Message ----- 
  From: Todd Franklin 
  To: cisco-voip at puck.nether.net 
  Sent: Saturday, August 12, 2006 2:28 PM
  Subject: [cisco-voip] H323 Ports hang


  Has anyone else seen/heard/(hopefully) fixed this?

  I have a 2801 in H323 mode.  Several POTS lines plugging into FXO modules.  Sometimes, the ports "hang", where the line cannot be answered (just rings, or rings busy).  We have to then reset the port or the router.  

  I would be curious to know.  I am going to call my POTS provider and see if it isn't something they are doing.



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060812/a61bdaae/attachment.html