[cisco-voip] VGW problem

[Voll, Scott]

I'm running CM 4.1.3sr2 and I'm using a MGCP 2801 with 4 FXO ports.
This is what I see on a call summary.

 

PerrydaleSD#sh voice call sum

PORT           CODEC    VAD VTSP STATE            VPM STATE

============== ======== === ==================== ======================

0/0/0         -         -  -                     FXOGS_ONHOOK

 

Then

 

0/0/0         -         -  -                     FXOGS_TIP_GROUND

 

Then

 

0/0/0         None      -  S_WAIT_RELEASE_RESP   FXOGS_WAIT_ONHOOK

 

Then

 

0/0/0         -         -  -                     FXOGS_PARK

 

Then

 

0/0/0         -         -  -                     FXOGS_RINGING

 

And continues to repeat and never rings the phone.

 

This is a ground start FXO connection to the local Telco.

 

IOS is 12.3(14)T5

 

Any ideas?

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060814/166a9c84/attachment.html