[cisco-voip] Disable CfwdAll

[Lelio Fulgenzi]

Two options (that I can see):
  a.. Modify the forwarding CSS: The forwarding CSS is exclusive of the line+device CSS combo. By creating a CSS with at least on partition with no DNs, you will effectively deny the ability to forward the line. Caution: This does not prevent forwarding to DNs in the <none> partition. If you have DNs in the <none> partition, first, reconsider why you have DNs in the <none> partition, it is very hard to do any class of service with DNs in the <none> partition. If you still have DNs in the <none> partition, then you can use block route patterns matching these DNs and put them into the partition.
  b.. Change the softkey templates: By modifying the softkey template to remove the CallFwdAll softkey.
Don't forget that the CCMuser pages also provide forwarding access.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Todd Franklin 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, August 15, 2006 9:13 AM
  Subject: [cisco-voip] Disable CfwdAll


  I want to disable CfwdAll on just one person's phone.
  Where in CCM do I do that?



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060815/cae0fb77/attachment.html