[cisco-voip] Unity not sending some messages to Exchange?

[Jonathan Charles]

Are the wav files sitting in the UnityMTA directory? Or are they failing on
the Exchange side?

I would re-run the permissions wizard as a first step.



Jonathan

On 8/17/06, Mike Armstrong <mfa at crec.ifas.ufl.edu> wrote:
>
> Running Unity 4.0(4)SR1, Exchange 2003.  When some callers leave
> voicemail,
> to the callers things appear normal, but message never shows up in
> Exchange.
> So far, it appears to be only internal callers affected -- outside
> callers'
> messages are stored normally and can be retrieved by the recipient.  Also,
> some internal callers work OK as well.
>
> I believe this started following an Exchange store reorganization,
> intended
> to break up one large store into several smaller ones.  Following this,
> the
> Message Store Manager tool was run and access granted to all the new
> stores.
> All subscribers' profiles, accounts, etc., appear normal.
>
> Would welcome any advice.
>
> Mike Armstrong
> UF/IFAS CREC
> Lake Alfred, FL
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060817/8a23444f/attachment.html