[cisco-voip] SRST transfer not working

[Ortiz, Carlos]

Here is what I have in the SRST config.  I changed the max-dn line to
have the dual-line parameter but still had the same issue?  Anyone have
a known working config?  This location has all calls go to a
receptionist who at xt 1009 who then transfers to the other phones.

 

call-manager-fallback

 max-conferences 2 gain -6

 limit-dn 7940 2

 limit-dn 7960 2

 timeouts interdigit 6

 ip source-address 10.107.248.1 port 2000

 max-ephones 25

 max-dn 50 dual-line

 default-destination 1009

 

Carlos

 

________________________________

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Saturday, August 19, 2006 11:25 AM
To: Robert Hugo; Ortiz, Carlos
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] SRST transfer not working

 

Can't you just add;

 

Call-manager-fallback 

    transfer-system full-consult

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Hugo
Sent: Friday, August 18, 2006 4:59 PM
To: Ortiz, Carlos
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SRST transfer not working

 

Also make sure you have this in your SRST config:

 

call-manager-fallback

 huntstop channel

 max-dn dual-line

 

 

When the router goes into SRST mode, this keeps the second channel free
for call transfer, call forwarding......

 

On 8/18/06, Ortiz, Carlos <CORTIZ at broward.org> wrote: 

I have a site that just went into SRST mode because the WAN is down.
Calls are coming in to the receptionist but she is unable to complete
transfers.  Any idea why that would be? 

 

Carlos


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 




-- 
Robert Hugo
Senior Voice Network Engineer
World Wide Technologies
60 Weldon Parkway
St. Louis, MO, 63043
1-314-409-6527
Cell:1-217-520-3261 

________________________________



Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060821/675feaa0/attachment-0001.html