[cisco-voip] CME and Unit express problem

[Ocampo, Walter]

Good morning, 

Just you could have the light to go ON when the received messages. Go to
the line configuration look for message waiting lamp policy 

Message Waiting Lamp Policy Light only

 

Regards,

 

Walter Ocampo

System Network Analyst

 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Hyde
Sent: Monday, August 21, 2006 6:18 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME and Unit express problem

 

I have setup a group mailbox for 3 users to use.  Is there a way for  

the WMI light to light up on one or all of the phones when a message  

is left in the group mailbox?

 

 

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060822/e38d2c8c/attachment-0001.html