[cisco-voip] What controls how quickly MWI is resynced?

[Simon, Bill]

We have over 7000 VMO subscribers and it takes 8 hours.  Resyncing MWI 
is a huge deal for us, and one we have never been satisfied with.  We 
are unable to implement Cisco's failover recommendation of resyncing MWI 
nightly due to the length of time it takes.  It is a big headache.  HELP!

Ortiz, Carlos wrote:
> We are around 1000 phones and the Resyncs seem to take a couple of hours 
> in our case.  Anyone know if it’s possible to speed this up?
> 
>  
> 
> ------------------------------------------------------------------------
> 
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Lelio Fulgenzi
> *Sent:* Tuesday, August 22, 2006 1:43 PM
> *To:* Simon, Bill; Robert Kulagowski
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] What controls how quickly MWI is resynced?
> 
>  
> 
> I can confirm that. We have multiple MWI ports configured but still only 
> see one or two ports being used at once.
> 
>  
> 
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
> 
>     ----- Original Message -----
> 
>     *From:* Simon, Bill <mailto:bills at tns.its.psu.edu>
> 
>     *To:* Robert Kulagowski <mailto:bob at smalltime.com>
> 
>     *Cc:* cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> 
>     *Sent:* Tuesday, August 22, 2006 1:32 PM
> 
>     *Subject:* Re: [cisco-voip] What controls how quickly MWI is resynced?
> 
>      
> 
>     We see no difference between enabling two MWI ports and enabling ten.
>     In both cases, it only seems to use two when performing a resync.  I
>     assume it is due to some other bottleneck in Unity that has nothing to
>     do with the MWI ports.
> 
> 
>     Robert Kulagowski wrote:
>     >  In a 72 port Unity 4.2(1) system, how come going to UTIM and
>     performing
>     >  a "Resync Now" doesn't use all 72 ports?  All the ports are available
>     >  for MWI, but from watching the PortStatusMonitor it's only using
>     Port 72
>     >  for the most part, and port 70 and 71 infrequently, so the resync
>     (after
>     >  a failover to the secondary) seems to be taking a very long time.
>     (At 17
>     >  minutes and still counting according to the eventvwr.)
>     >  _______________________________________________
>     >  cisco-voip mailing list
>     >  cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     >  https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>     -- 
>     Bill Simon - bills at tns.its.psu.edu <mailto:bills at tns.its.psu.edu> -
>     (814) 865-2270
>     http://tns.its.psu.edu/
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
> 

-- 
Bill Simon - bills at tns.its.psu.edu - (814) 865-2270
http://tns.its.psu.edu/