[cisco-voip] Directory Button Leads to 'Host Not Found'

[Jason Aarons (US)]

Are you using DNS for the hostname, if so switch to ip address?

 

Different DNS settings in the DHCP, domain suffix, etc?

 

A quick sniffer trace on the client should show the differences between
the two requests.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Tuesday, August 22, 2006 5:39 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Directory Button Leads to 'Host Not Found'

 

VPN Concentrator <-> Internet <-> Generic Router <-> PIX 501 <-> IP
Phone 

I have a few Cisco IP hard phones that are connected via hardware VPN
(PIX 501) to our network.  On PIXs with 6.3(4) IOS on it, you get a
'Host Not Found' when you press the Directory button on the phone.
However, on the PIX with 6.3(1) IOS it, it works just fine.  Does anyone
know what could be possibly causing this?

Thanks in advance. 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060822/696c6997/attachment.html