[cisco-voip] unsubscribe

Fri Aug 25 07:20:37 EDT 2006

unsubscribe

Regards,

SAH.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Kassel
Sent: Friday, August 25, 2006 4:05 PM
To: Linsemier, Matthew; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Voice Vlan Configurations

Matthew

Thanks for replying, I am interested in your port-security configurations on
your example, do your ports get mac-addresses by using the switchport
port-security mac-address sticky command, could you possibly give me an
example on the other commands used.

Regards

Nick  

  _____  

From: Linsemier, Matthew [mailto:MLinsemier at apcapital.com] 
Sent: Thursday, August 24, 2006 5:08 PM
To: Nick Kassel; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Voice Vlan Configurations

Nick,

This is a really good question to ask since there are so many different ways
to configure QoS.  When we initially deployed QoS 4 years ago we used a
combination of Cisco QPM and a collection of configurations pulled from
documents, Cisco Press books, and industry peers.  As of lately, we have
been using the AutoQOS feature in all of our 3550 switches and have had
great luck.

Here is an excerpt of how our voice ports are configured on our 3550.

interface FastEthernet0/1

 switchport access vlan 3

 switchport mode access

 switchport voice vlan 203

 switchport port-security maximum 3

 switchport port-security

 switchport port-security aging time 2

 switchport port-security violation restrict

 switchport port-security aging type inactivity

 no logging event link-status

 mls qos trust device cisco-phone

 mls qos trust cos

 auto qos voip cisco-phone 

 wrr-queue bandwidth 10 20 70 1

 wrr-queue min-reserve 1 5

 wrr-queue min-reserve 2 6

 wrr-queue min-reserve 3 7

 wrr-queue min-reserve 4 8

 wrr-queue cos-map 1 0 1

 wrr-queue cos-map 2 2 4

 wrr-queue cos-map 3 3 6 7

 wrr-queue cos-map 4 5

 priority-queue out

 spanning-tree portfast

 spanning-tree bpduguard enable

For your data ports if you remove your AutoQoS commands and remove your
voice VLAN, it will default to access mode.  Note that if you have a phone
plugged into this and the data VLAN can see the CallManagers, the phone will
still register.  You can also issue a "Show Parser Macro" to see some of the
pre-defined macros that Cisco has built by default for different port types
such as desktop, phone, desktop + phone, switch, router, etc.

I am anxious to hear some of the rest of the lists input on there methods
and overall on AutoQoS in an all Cisco environment.

Thanks,

Matt

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Kassel
Sent: Thursday, August 24, 2006 11:25 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Voice Vlan Configurations

There seems to be so many different ways to configure switch ports for voice
and data that I am not sure are configurations are correct.

This is the configs we have been using for our branch offices on 3560
switches, we have vlan 1 as our data vlan and vlan 2 as the voice vlan.

Port 24 is the trunk port to the router which has the WAN and voice
configurations.

Also what configurations should I use on ports that are just for data?

Voice Port

!

interface FastEthernet0/X

switchport voice vlan 2

 srr-queue bandwidth share 10 10 60 20

 srr-queue bandwidth shape  10  0  0  0

 mls qos trust device cisco-phone

 mls qos trust cos

 auto qos voip cisco-phone

 no mdix auto

 spanning-tree portfast

!

Router Port

!

interface FastEthernet0/24

 description Router Trunk Port

 switchport access vlan 2

 switchport trunk encapsulation dot1q

 switchport mode trunk

 srr-queue bandwidth share 10 10 60 20

 srr-queue bandwidth shape  10  0  0  0

 mls qos trust cos

 auto qos voip trust

!

****************************************************************************
*******************

The information contained in this e-mail is strictly confidential, some or
all
of which may be legally privileged. It is for the intended recipient only.
Access to this e-mail by any other person is prohibited. If you are not the
intended recipient, any use, disclosure, copying, printing, distribution of,
replying to or any action taken or omitted to be taken in reliance on this
e-mail, is prohibited and may be unlawful. Please contact the sender
immediately
should this e-mail have been incorrectly addressed or transmitted.

You accept that any instructions are deemed to have been given at the time
the
recipient(s) accesses them and that delivery receipt does not constitute
acknowledgement or receipt by the intended recipient(s). You accept that
there
may be a delay in processing the instructions received from e-mails after
Charles Stanley has received them. You are advised that urgent, time
sensitive
and confidential communications should not be sent by e-mail. 

You acknowledge that e-mails are not secure and you accept the risk of
malfunction, viruses, unauthorised interference, mis-delivery or delay.
****************************************************************************
********************

Charles Stanley & Co. Ltd
Registered Office: 25 Luke Street London EC2A 4AR

Tel: 0207 739 8200 Fax: 0207 739 7798
Registered in England No. 1903304

Charles Stanley Sutherlands and Charles Stanley Securities are divisions of
Charles Stanley & Co. Ltd

Authorised and Regulated by the Financial Services Authority, Member of the
London Stock Exchange, International Securities Markets Association, and The
London International Financial Futures &
Options Exchange.

This footnote also confirms that this email message has been swept by McAfee
VirusScan and SurfControl Email Filter software.

  _____  

CONFIDENTIALITY STATEMENT

This communication and any attachments are CONFIDENTIAL and may be protected
by one or more legal privileges. It is intended solely for the use of the
addressee identified above. If you are not the intended recipient, any use,
disclosure, copying or distribution of this communication is UNAUTHORIZED.
Neither this information block, the typed name of the sender, nor anything
else in this message is intended to constitute an electronic signature
unless a specific statement to the contrary is included in this message. If
you have received this communication in error, please immediately contact me
and delete this communication from your computer. Thank you.

  _____  

****************************************************************************
*******************

The information contained in this e-mail is strictly confidential, some or
all
of which may be legally privileged. It is for the intended recipient only.
Access to this e-mail by any other person is prohibited. If you are not the
intended recipient, any use, disclosure, copying, printing, distribution of,
replying to or any action taken or omitted to be taken in reliance on this
e-mail, is prohibited and may be unlawful. Please contact the sender
immediately
should this e-mail have been incorrectly addressed or transmitted.