[cisco-voip] Block specific inbound calls

[Carter, Bill]

By your response, I assume the blocking has to be done on the gateway.
Customer wants a more robust solution to handle and manage a large
number of blocked numbers.
 
Good thing is, telecom is hoping I say it is not possible!!!

________________________________

From: Mike Mike [mailto:voipermike at gmail.com] 
Sent: Friday, August 25, 2006 3:09 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Block specific inbound calls


If your gateway is H.323 you can block the incoming calls.
 
On 8/25/06, Carter, Bill <bcarter at sentinel.com> wrote: 

	I have been asked if/how can inbound calls FROM a specific
number be
	blocked.  A customer is tired of hearing from a couple of sales
people. 
	
	
	This email may contain proprietary and confidential information
for the sole use of the intended recipient.
	Any review, retransmission, dissemination, or other use of this
information by persons or entities other than 
	the intended recipient is prohibited. If you are not the
intended recipient, please contact the sender and
	delete all copies. To the extent that opinions are expressed in
this message, they are not necessarily the
	opinions of Sentinel Technologies or any of its affiliates,
employees, directors, officers or shareholders.
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060825/6b28f18f/attachment.html