[cisco-voip] question about transcoding

[James Grace]

Ok so now I don?t have any trancoding setup at all .   so should I install a router at the datacenter for transcoding 

James D Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer
MSN Messenger ID: jgrace29 at hotmail.com
MAC IChat ID: 
jgrace29 at mac.com


-----Original Message-----
    From: "Aman Chugh" <aman.chugh at gmail.com>
    Sent: 8/27/06 2:09:25 AM
    To: "jgrace at digitelusa.net" <jgrace at digitelusa.net>
    Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
    Subject: Re: [cisco-voip] question about transcoding
    

Make s    
    Make sure you have consistency in the codec which you use for Unity prompts
    and message recording and unity region codec to other remote sites ,It is
    prefferred that all this should be same.
    
    
    Aman
    
    
    On 8/27/06, James Grace <jgrace at digitelusa.net> wrote:
    >
    >
    > We have a data center that houses the CM and unity (unified messaging)
    > servers..  then we have an srst site that has all the ip phones.   There is
    > no pstn connection or ip phones at the datacenter.  The 2 sites are
    > connected by p2p T1s?  What do I need to do about transcoding so that the ip
    > phones won't run into issue with unity or Conference bridges?  The unity
    > server has 72 VM ports. Not sure if this matters??
    >
    > ---
    >
    >
    >
    > _______________________________________________
    > cisco-voip mailing list
    > cisco-voip at puck.nether.net
    > https://puck.nether.net/mailman/listinfo/cisco-voip
    >