[cisco-voip] MoH For PSTN H.323 G/W Not Working

[Ryan Ratliff]

Define not working.  Do they hear tone on hold or just silence?

Tone on hold means there is a CM misconfiguration.  Silence means the  
RTP is not getting to the router.

Do phones in Site A hear MOH?

-Ryan

On Aug 28, 2006, at 6:30 PM, Johan Bloemhard wrote:

MoH works for IP->IP; however, MoH does not work for PSTN->IP.



PSTN are located at Site A, while CMs are located at Site B.  Both  
site routers have IP multicast-routing enabled already.



CM Version (cmpub/cmsub): 4.1



Found Bug ID: CSCdz00697 but looks like it only applies to CM 3.3.



Any advice?



TIA



Johan Bloemhard
Senior Information Technology Specialist
___________________________________
Silver Falls School District 4J
802 Schlador Street
Silverton, OR 97381
w: 503.873.6331



Disclaimer: This message may be legally privileged and/or is intended  
only for the use of the addressee(s). The content and views expressed  
in this email may represent the views of the sender and not those of  
Silver Falls School District.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip