[cisco-voip] Qos for voice on edge router

Ted Nugent tednugent69 at yahoo.com
Tue Aug 29 20:19:15 EDT 2006


A good place to start is the QOS SRND

http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf

Check out the WAN Aggregator section for
Classification/Marking and on Link type/speeds.

Here's a very simple LLQ config and remember if you're
using FR you need to shape so that you don't burst
over your CIR. There are some good examples of this in
the SRND.

class-map match-any control
 match protocol skinny
 Match protocol mgcp
class-map match-all rtp
 Match protocol rtp
!
!
policy-map LLQ
 class rtp
  priority percent 33
 class control
  bandwidth percent 5
 class class-default
  fair-queue
!

HTH Ted

--- James Grace <jgrace at digitelusa.net> wrote:

> I?m looking for some qos example for my edge routers
>  we have two routers one for voice and one for WAN. 
> We are going to set up basic qos on our switchs auto
> qos and mls trust device.  But what should we put on
> the wan gateways ... Our cm and unity servers are at
> the central site and we have mutiple remote sites
> 
> James D Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer
> MSN Messenger ID: jgrace29 at hotmail.com
> MAC IChat ID: 
> jgrace29 at mac.com
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the cisco-voip mailing list